海口地区的木材平衡含水率

海口地区的木材平衡含水率蔡则谟（中国林业科学研究院热带林业研究所广州５１０５２０）关键词木材平衡含水率，海口研究各气候区的木材平衡含水率（Ｗｅ）对木材干燥有重要意义，自５０年代以来，华东、华北、东北、西南、西北及中南等地区的有关单位在这方面做了许多工...     

山桂花人工林林木材性与生长特性关系研究

对山桂花人工林林木木材基本密度和纤维长度径向变异的研究表明 ,山桂花人工林林木的木材材积加权平均基本密度为 0 4 82 6g/cm3 ,低于山桂花天然林林木的木材基本密度 (0 5 30 0g/cm3 ) ;山桂花人工林林木木材纤维长度为 1182 4～ 15 96 4 μm ,材积加权平均值为 1375 4 5 μm ,低于山桂花天然林林木的木材纤维长度 (12 0 0～ 2 2 5 0 μm)。通过研究还得出了基本密度 (BD)、纤维长度 (FL)与生长轮 (年龄CA)和生长轮宽度(RW)。数学模型为FL =12 6 9 86 4 1+2 7 0 2 0 7CA - 5 4 4 4 3RW ;BD =0 4 782 - 0 0 0 2 4CA +0 0 0 2 9RW ,以此分析了木材性质与树木生长特性之间的关系 ,为速生用材林的培育提供依据。     

杨木／无机硅化物复合材处理工艺初探

用硅酸单体溶液（SAMS）处理及用硅酸钠-三氧化二硼-乙酸复合处理改性文县杨（Populus wenxianesis)，制备杨木/无机硅化物复合材（WIC）。结果表明，在所选择的工艺条件下，SAMS处理的杨木WIC具有很好的尺寸稳定性和抗流失性，复合处理的杨木WIC的阻燃性能和防腐性能有了明显提高。     

豆科树种无性快速繁殖技术研究与进展

豆科树种目前已广泛应用于荒山绿化、饲用及观赏。文中从扦插(嫩枝扦插、硬枝扦插、根插)，组织培养等方面综述了豆科树种无性快速繁殖技术的研究和进展。指出目前豆科树种嫩枝扦插技术研究还局限在对某一树种繁殖途径的探索阶段；硬枝扦插技术研究较为系统和深入，对不同树种扦插生根的影响因素有了比较深入的了解，并因此建立起较为成熟的技术体系；根插方法简单，成活率高，但是研究普遍较少；豆科树种组织培养虽较为困难，但某些树种也已经建立起了较为完善的再生体系。此外，还对豆科树种快速繁殖的生理基础研究进行了讨论，建议加大对豆科树种快速繁殖技术和生理机制的研究力度，为解决优良种质资源快速扩繁奠定基础。     

Design of wood/montmorillonite (MMT) intercalation nanocomposite

Studying new wood composites through nano science and technology (NSC) will develop new compounding theory of wood, and accelerate the combination of new technology, wood science, material science and other disciplines. The compounding of wood and inorganic MMT on nanoscale molecular level has high potential to greatly improve the mechanical properties, fire retardance, abrasion resistance, decay resistance, dimensional stability and other properties of wood. Based on the great achievements of polymer/montmorillonite (MMT) nanocomposites, this paper reviewed nano intercalation compounding methods (i.e. in-situ intercalative polymerization and direct polymer intercalation), and discussed the structure, properties and modification of montmorillonite (MMT). According to the main chemical components and particular structure of wood, the authors discussed the liquefaction and plasticization of wood, compared the dissolvability and meltability between wood and polymer, and then systematically put forward the basic idea, technological processes and schematic diagram to prepare wood/MMT nanocomposites (WMNC). The key technology to prepare WMNC is either to introduce delaminated MMT nanolayers into wood with the help of some intermediate polymers, or to obtain liquefied wood or plasticized wood from the complicated natural composite. It is applicable and effective to realize wood/MMT nanoscale compounding with the help of proper intercalation agent and medium polymer through the proposed “one-step” or “two-step” impregnating processes.     

Decay Detection of Ancient Wood Rafters in Tibet by Stress Wave Testing Method

Visual classification and stress wave non-destructive testing technology were adopted to evaluate the decay status of ancient Populus wood members （rafters） replaced from the Potala Palace. The decay status of wood members was evaluated by stress wave testing and visual observation. For most of the ancient wood members, the evaluation results by two methods were consistent with each other. Also stress wave testing techniques can find the internal wood member decay to eliminate the hidden hazard for ancient wood members, and offer relatively accurate quantitative information for the safety status of ancient wood members. Thus during the maintaining for ancient architectures, visual observation combined with stress wave testing techniques is a good way to evaluate the degradation of ancient wood members.     

聚氨酯木材胶粘剂的研究(Ⅰ)——化学组成对粘接力学性能的影响

以多亚甲基多苯基多异氰酸酯（PAPI）和聚醚多元醇为原料合成了一种单组分、室温湿固化的端异氰酸酯聚氨酯胶粘剂。本研究考察了物料的化学组成对胶粘剂粘接木材的力学性能产生的影响。实验表明，与改性二苯基二异氰酸酯（MDI）相比，PAPI合成的胶粘剂对木材粘接干压剪强度提高了60％；将相对分子质量（Mw）为800、1000和2000的聚氧化乙烯二醇（PED）、Mw为300和3000的聚氧化丙烯三醇（N303和N330）以及聚四氢呋喃一氧化丙烯二醇（NG220）按优化的比例复合使用，以改性胺和有机锡复合催化，可有效提高粘接木材的干和湿压剪强度、固化速率以及木破率。Fr-IR光谱证实聚醚多元醇的-OH与PAPI的-NCO反应生成了氨基甲酸酯（-NHCOO-），但N—H和G=O均以氢键形式存在。     

接种用松材线虫分离种群的筛选

自2001年10月以来开展了“马尾松松材线虫抗性育种技术的开发”的项目工作，为选拔马尾松松材线虫抗性候补树，确保接种用的松材线虫虫源，对松材线虫分离种群的繁殖、致病力和增殖能力作了研究。对不同地区采取由松材线虫致死的19棵当年枯死木样品，用贝曼漏斗法从中分离出19个松材线虫分离种群，在25℃条件下，成功培养16个分离种群。在2a生黑松苗上进行接种，测定松材线虫的致病力。55d后在野外试验区的感病率为26．1％～97．6％，大棚试验区的感病率为84．4％～100％，野外与大棚内的加权平均感病率差20％以上，显示出松材线虫致病力由气温增高和土壤干燥而增强。分别对16个分离种群以相同的接种头数在PDA培养，其繁殖面积的快慢不同；以大量繁殖为目的，在同量的小麦培养基中以相同的接种量，各自的繁殖量也不同，每培养皿的繁殖量为98万～176万头。根据试验结果，选用致病力最强、繁殖力较强的广朱3B松材线虫分离种群作为接种用松材线虫的接种虫源。     

丛生竹材笋两用林丰产栽培技术

１９９３～１９９６年在云南省双江、西盟、新平、峨山等１０个县设点，采用简单对比试验、随机区组试验、正交试验等方法，对龙竹、版纳甜龙竹、勃氏甜龙竹、黄竹、野龙竹、云南龙竹等材笋两用丛生竹种的丰产技术进行了较为系统的试验研究。从壮苗培育、适地适竹、细致整地、合理密植、栽植技术、科学管理（林农间作，土壤施肥，伐桩施肥，叶面施肥，留笋养竹，修枝封顶）、合理采伐和适时复壮更新等方面，探索出能为生产应用的一套丛生竹丰产栽培技术。应用此套技术措施，在云南省实现了丛生竹当年育苗，当年上山定植，３～４年成林成材，每年每ｈｍ２产风干竹材２２．５ｔ以上，产鲜笋７．５ｔ以上，其经济、生态和社会效益较为明显。     

Contributions of Extractives and Lignin to the Fractal Geometry of Internal Wood Surfaces

Internal wood surfaces can be treated as fractals, which are between Euclidean geometry and complete randomness. The fractal dimension Dfs is very informative in investigating the roughness of the internal surfaces of wood. In this study, the water sorption isotherms, including adsorption and desorption isotherm, of untreated, benzene-alcohol extracted and delignified (after benzene-alcohol extracted) spruce (Cuninghamia lanceolata) were measured at 30℃. On the basis of these isotherms, the Dfs values were calculated by FHH equation, which is based on multimolecular sorption. The results showed that both groups of Dfs values (respectively calculated from adsorption and desorption isotherms) of untreated, benzene-alcohol extracted and delignified wood have same order, that is, untreated > benzene-alcohol extracted - delignified. Therefore, the conclusion can be made that the benzene-alcohol extractives have significant contribution to the fractal geometry of internal wood surfaces. Lignin also has influ